Modérateurs: Modération Forum Home-Cinéma, Le Bureau de l’Association HCFR • Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 15 invités

Lecteurs Blu-Ray

Dézoner Sony BDP-S7200

Message » 29 Fév 2020 17:00

Bonjour à tous,

je possède un lecteur blu ray sony BDP-S7200 et souhaiterai le dézoner (lecture zone 1 impossible d'origine).
Après avoir suivi la procédure suivante*, le dézonage ne se fait pas.
La télécommande pilote le lecteur blu ray, en revanche le lecteur ne répond pas en appuyant sur les touches numériques 1,2,3,4,5

Peut-être que la version du système de mon lecteur est trop récente?
Version logiciel: M21.R.0164
Télécommande OFA URC 7140

Quelqu'un a t-il déjà réussi sur ce modèle ou un similaire?
Merci de votre aide.
Guillaume

*Region free Sony BDP-S7200 for DVD playback only.

Full procedure for a OneForAll remote is as follows:

1. Press DVD
2. Hold the magic button until the DVD button flashes twice.
3. Press 0533

4. Hold the magic button until it flashes twice.
5. Press 994
6. Press Magic Key (don't hold)
7. Press 00189 (if your oneforall remote uses 4 digit or 3 digit codes, use less leading zeros)
8. Press 1 ( this sets it to key 1 - it flashes twice )

9. Hold the magic button until it flashes twice.
10. Press 994
11. Press Magic Key (don't hold)
12. Press 00255
13. Press 2 ( this sets it to key 2 - it flashes twice )

14. Hold the magic button until it flashes twice.
15. Press 994
16. Press Magic Key (don't hold)
17. Press 00095
18. Press 3 ( this sets it to key 3 - it flashes twice )

19. Hold the magic button until it flashes twice.
20. Press 994
21. Press Magic Key (don't hold)
22. Press 00221
23. Press 4 ( this sets it to key 4 - it flashes twice )

24. Hold the magic button until it flashes twice.
25. Press 994
26. Press Magic Key (don't hold)
27. Press 00079
28. Press 5 ( this sets it to key 5 - it flashes twice )

The remote is now programmed and ready to use, to make the BDP-S350 region free:

1. Use the remote that came with the player to bring the player out of standby.
2. Make sure there isn't a disc in it. Wait for the player to show "EMPTY", then "HOME".
2. Press 1, 2, 3, 4, 5 on the oneforall remote. The player will respond with "OK".
3. Put the player back into standby with the Sony remote.
4. Next time you turn on the player it will be region free for DVD playback.
Please note: Depending on your OneForAll remote, you may have to use only the last 3 or 4 numbers in the steps 7, 12, 17, 22 and 27.
Successfully tested with a OneForAll URC 7960 remote on a European Sony BDP-S7200 model.
seatime
 
Messages: 16
Inscription Forum: 29 Fév 2020 12:30
  • offline

Retourner vers Lecteurs Blu-Ray